Image
Product
Price
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 10.07 HP At 4945 RPM;CARB E.O. D-269-28
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 10.07 Hp @ 4945 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Rf-1036
- Item Weight: 9.800 Lbs. (4.4 Kg)
- RPM: 4945
- Product Box Height: 12.250 In. (311mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 12.250 In. (311mm)
- Air Filter Outlet Length: 6.000 In. (152mm)
- Product Box Length: 20.250 In. (514mm)
- Clamp Quantity: 7
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Color: Black
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 10 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1997 - Ford Mustang | V | - | 8 Cyl 4.6L | GT | X | 281 |
- Includes Air Filter/CNC Mandrel Bent Inlet Tube/Hoses/Clamps/Heat Shield/Adaptors/Hardware; Fenderwell Mount; Chrome Finish;CARB E.O. D-245-14
- Power-Plus Series® Cold Air Induction System; Includes Air Filter/CNC Mandrel Bent Inlet Tube/Hoses/Clamps/Heat Shield/Adaptors/Hardware; Fenderwell Mount; Chrome Finish;
- Power-Plus Series® Cold Air Induction System
- Product Attributes:
- Filter Material: Cotton Element
- WARNING CA Proposition 65: Yes
- Filter Color: Blue
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm (for A List Of Chemicals And More Information Go To Www.p65warnings.ca.gov)
- Hose Color: Blue
- Hose Material: Silicone
-
Features:
- Increases Air Flow Up To 75 Percent
- No Tune Required
- Real Horsepower And Performance Gains
- Washable High Flow Cotton Element Filter
- Chrome Finish
- Made In The USA
- This great looking BBK Performance cold air intake kit has been designed as a direct replacement for the restrictive factory intake and installs with few simple hand tools in less than an hour - This air intake kit will improve your horsepower, torque and throttle response right out of the box. All BBK cold air kits are designed to pull cooler denser air into the intake for improved overall power. All Kits include high flow Inlet tube, high flow washable cotton element air filter and all required shields, mounts, clamps, hardware and installation Instructions. This BBK Cold air intake is 50 State Legal - C.A.R.B Approved
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Ford Mustang | V | - | 8 Cyl 4.6L | GT | 281 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 12.05 HP At 5860 RPM;CARB E.O. D-269-25
- K/N s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K/N s famous million mile limited warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Not Applicable
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 12.05 Hp @ 5860 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Rf-1048
- Item Weight: 6.500 Lbs. (3 Kg)
- RPM: 5860
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 12.250 In. (311mm)
- Air Filter Outlet Length: 6.000 In. (152mm)
- Product Box Length: 20.250 In. (514mm)
- Clamp Quantity: 1
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 12 Hp
- Air Filter Element Washable: Yes
- Couplers Included: No
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- The K&N 57-2523-2 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Ford Mustang models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-2523-2 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points and accommodates the factory mass air sensor. The installation requires commonly available tools to do the job. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1997 - Ford Mustang | V | - | 8 Cyl 4.6L | SVT Cobra | V | 281 |
- Performance Air Intake System
- Includes Red Air Filter/Polished Tubing/Heat Shield; Estimated Horsepower Gain 6.83 HP At 4600 RPM;CARB E.O. D-269-38
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Short Ram Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 6.83 Hp @ 4600 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Rf-1036
- Item Weight: 8.700 Lbs. (3.9 Kg)
- RPM: 4600
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- System Type: Cold Air
- Clamp Quantity: 7
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 7 Hp
- Intake Pipe Inlet Length: 16.000 In. (406mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.000 In. (76mm)
- Intake Pipe Outlet Length: 16.000 In. (406mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.000 In. (76mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1997 - Ford Mustang | V | - | 8 Cyl 4.6L | GT | X | 281 |
- Performance Air Intake System
- Includes Air Filter/Adaptor/Hardware; Estimated Horsepower Gain 4.46 At 4216 RPM;Not Legal For Sale Or Use In California
- K/N s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. K/N air intakes come with K/N s famous million mile limited warranty.
- 63 Series Aircharger Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Not Applicable
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 4.46 Hp @ 4216 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-1014
- Item Weight: 3.800 Lbs. (1.7 Kg)
- RPM: 4216
- Product Box Height: 9.250 In. (235mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 9.130 In. (232 Mm)
- Air Filter Outlet Length: 6.000 In. (152mm)
- Product Box Length: 15.130 In. (384mm)
- Clamp Quantity: 2
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Top Style: Metal
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 4 Hp
- Air Filter Element Washable: Yes
- Couplers Included: No
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed Horsepower Gain
- Designed To Improve Throttle Response And Engine Sound
- Easy To Install
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- The K&N AirCharger 63-1008 air intake system replaces your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-1008 air intake consists of a K&N high-flow air filter that directs air into the engine's throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1997 - Ford Mustang | V | - | 8 Cyl 4.6L | SVT Cobra | V | 281 |
Showing 1 - 5 of 5 products
Loading...